• auth@lemmy.ml
    link
    fedilink
    arrow-up
    2
    arrow-down
    4
    ·
    edit-2
    8 months ago

    I’ve never seen one with that much power for phones… at 5v that would be 6A for the 30watts one… must be designed for laptops

    • fuckwit_mcbumcrumble@lemmy.world
      link
      fedilink
      English
      arrow-up
      16
      ·
      8 months ago

      Basically every phone made in the last 5 years will charge at over 5v for “quick charging”.

      The USB is typically only up to 3 amps max at any voltage less than 20.

    • kurcatovium@lemm.ee
      link
      fedilink
      English
      arrow-up
      9
      ·
      8 months ago

      My cheap(ish) phone has ~30W charger too. It’s something like 2,5A/12V or 1,5A/18V, which is pretty common these days. I believe I’ve seen phones with up to 100W charging capability (not sure about longevity though).

      • sugar_in_your_tea@sh.itjust.works
        link
        fedilink
        arrow-up
        2
        ·
        8 months ago

        My work laptop (MacBook) is ~100W charging, but only ~5A at ~20V, and ~3A at anything under 20V.

        I’m guessing phones with super fast charging work similarly.

        • kurcatovium@lemm.ee
          link
          fedilink
          English
          arrow-up
          2
          ·
          8 months ago

          Indeed, just check some PD charger specs, there are usually all the different volt/amp readings the charger can produce.

    • Voyajer@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      edit-2
      8 months ago

      It looks like it’ll only do 3A over 5V which is typical. You’ll need to connect something that can accept 15 or 20V to get the full 45W. The upside of these is it supports 15V for devices that don’t go higher, since it seems to be the least common supported voltage for usb pd chargers.