Happens a lot with car rke fobs, I usually have to replace the housings and buttons all together for a permanent fix. I tried the super glue and aluminum foil method and it temporarily works. Nothing I used to attach the aluminum to the worn button pad really results in a long term fix though (super glue, silicone, epoxy, hot glue). Is this a better solution?

Had good memories with this ngl

Damn this one is tough my best guess LJ is like how the manufacturer tracks it internally or something like that and the 349 could be like eat before the 349th day of that year. Again this is just a guess probably contact the manufacturer to be 100% clear what that means.

That headline reads like a tongue twister

“Haha April fools”

Top of my head: like a Linksys MR7340 hydra should have enough ram and storage for openwrt for a few years iirc but only 3 Ethernet port so a switch might be needed. Think its 50 USD rn but I’ll have to double check that. Another option would be like a used Linksys AC2200

Actually was doing some research on this the other day for a friend and here’s what I found.

Used:

• ASUS ZenScreen (MB16ACE) 15.6” - buy used for around 140$ USD on amazon maybe cheaper on eBay

• ViewSonic VG1655 15.6 Inch - buy used for around 120-130 USD on amazon maybe cheaper on ebay

New:

• ASUS ZenScreen (MB166C) 15.6" - currently limited deal of around 100 USD new. Its the best bang for your buck imo if you want to go with a known brand

Think there’s also an official emulator from android studios but I could be wrong

Wouldn’t the light also wake the wife up

Damn that is genius

I guess it really depends on your area. I hear stories that it’s the bee’s knees and then other ones where the signal is so congested, especially if using a mvno. Personally I’m sticking with 4g, in my area 5g is about the same in speed unless you want to stay up til like 4am to get a decent boost.

Top of my head: chip away at the boulder and take it piece by piece

Just to clarify to not confuse OP. When you say dilute that means mixing it with another oil, right? Like coconut oil or something?

Ba dum tss lmao

He has mix feelings about it…that’s it

Don’t own an android TV or box but can you really not change the default launcher natively?

Thank god I’m not alone, haha

Not a serious injury just poor technique. Was sharpening like 10 knives on a stone and didn’t realize I was grinding some of my guide finger also.

Damn that is interesting as hell I honestly had no clue I really appreciate it. Think I’ll order one with my next paycheck and a wrist strap

Edit: Just so I can understand 100% since the conductivity of the mat is doing most of the work why wouldn’t a sheet of conductive metal work here? Assuming both the person and electronic is in contact.

Wait so you can use a static dissipating mat without it being connected to a grounding outlet and still be protected? Why do mats even have the option of grounding then, is it just for added insurance?