• 0 Posts
  • 12 Comments
Joined 5 months ago
cake
Cake day: June 22nd, 2024

help-circle

  • I once read a fairly interesting take on this: Historical settings are often chosen to wrap the story in a certain context in order to allow the reader to picture the style and theme without having to establish and explain a new setting first, so basically you skip on world building. If you read an analogy to Zeus you will immediately have an image in mind as well as a bunch of characteristics, no need to establish that beforehand.

    Now, considering this it makes sense to choose a setting people already know - the 16th centruy Ottoman Empire is certainly interesting, but the average reader might know next to nothing about it and you have to explain everything first.

    Why are these three settings used so much? Well, it’s positive feedback! Literature, Theatres and Video Games will select something well known and it receives popularity. In addition, a piece of media using a less-popular setting will have to a) compete with other media to become popular and b) provide plenty of worldbuilding in order to have the setting make sense. A piece of media that both establishes a “new” setting AND is very popular is going to be rare, making the entry of a new mythology/historical setting into mainstream difficult.


  • Blowing into an enclosed space is chaotic, the fan has to push against air currents being deflected. Blowing into an open space (aka sucking out of you dishwasher) is much more orderly, the fan can simply pull the air out and there are much fewer air currents running orthogonal.

    This is as far as my very basic knowledge goes here. You can try this effect by exhaling and inhaling air through a barely open mouth or a straw.

    EDIT: On a related note, never “blow” during fellatio.






  • Great answers already, I’d like to add a few things: Lithium batteries like to be charged at 1C, meaning that if they have a capacity of 1.6 Ah they like to be charged at 1.6 A and will (theoretically) be fully charged in one hour (this is wrong in practice though). You can charge most of them at a higher rate (e.g. at 3.2 A), but they should be rated for it. If you don’t better, stick to a lower amperage. Too low of an amperage should not be an issue but I’m not sure - it will take ages though.

    The voltage has to fit! Batteries change their voltage over the course of charging/discharging. This is more pronounced in older NiMH or NiCdH (discard those) batteries but still relevant. A 12V charger can charge your batteries to 12V. Most chargers can handle different voltages and will usually select the correct voltage depending on the battery. This is important if you are charging LiIons or LiPos (two types of Lithium batteries), as overcharging them is NOT advised. They generally peak at around 4.2V per cell I think with a working charge (don’t know the term) of 3.7V per cell. Some chargers require you to select the number of cells. Charging a 2-cell LiPo with 12-13 volt is a bad idea I wager and charging a 3-cell LiPo with 9.something volt won’t work (it won’t drain it, but the minimal voltage is higher than what the charger provides - current would like to flow the other way if It could).

    TL,DR: If you can adjust the charging parameters manually or you are doing something the manual states you shouldn’t be doing, educate yourself. If however you only plug in your phone (with a painfully small battery at 2 Ah) and only provide a 1.5A*5V=7.5W charger, you are perfectly fine.