Don’t look East.

Yes, you’re right. Headline probably translated because it’s not a clear way to say this. Also was surprised that gold bars are only 2K each, but I see the common size is 1 oz and they aren’t very big…

“Gifted” is a bit of a stretch. They were found in a package addressed to the Red Cross. Rightfully delivered, perhaps.

Don’t look down.

Big Brother Turns 68: George Orwell’s ‘1984’ Masterpiece Coined a Lasting Lexicon for the World

Especially if you were indigenous.

wunderwaffen

too good a word not to research… comes from WWII, naturally…

panjandrum (British) - two wheels connected by a sturdy, drum-like axle, with rockets on the wheels to propel it forward. Packed with explosives, it was supposed to charge toward the enemy defenses, smashing into them and exploding, creating a breach large enough for a tank to pass through. But when it was tested on an otherwise peaceful English beach, things didn’t go quite as planned. The 70 slow-burning cordite rockets attached to the two 10-foot steel wheels sparked into action, and for about 20 seconds it was quite impressive. Until the rockets started to dislodge and fly off in all directions, sending a dog chasing after one of them and generals running for cover. The rest was sheer chaos, as the Panjandrum charged around the beach, completely out of control. Unsurprisingly, the Panjandrum never saw battle.

The Goliath Tracked Mine (German) The tracked vehicle could carry 60kg of explosives and was steered remotely using a joystick control box attached to the rear of the Goliath by 650m of triple-strand cable. Two of the strands accelerated and manoeuvred the Goliath, while the third was used to trigger the detonation.

Each Goliath had to be disposable, as each was built specifically to be blown up along with an enemy target. The first models were powered by an electric motor, but these proved difficult to repair on the battlefield, and at 3,000 Reichsmarks were not exactly cost effective. As a result, later models (the SdKfz 303) used a simpler, more reliable gasoline engine.

Being sent back to the drawing board is a disgrace usually reserved for weapons that never saw battlefield action. Goliaths did see combat and were deployed on all German fronts beginning in the spring of 1942. Their role in the action was usually nugatory, however, having been rendered immobile by uncompromising terrain or deactivated by cunning enemy soldiers who had cut their command cables.

The bat bomb (American) Shortly after the attack on Pearl Harbor, a Pennsylvania dentist named Lytle S. Adams contacted the White House with a plan of retaliation: bat bombs.

The plan involved dropping a bomb containing more than 1000 compartments, each containing a hibernating bat attached to a timed incendiary device. A bomber would then drop the principal bomb over Japan at dawn and the bats would be released mid-flight, dispersing into the roofs and attics of buildings over a 20- to 40-mile radius. The timed incendiary devices would then ignite, setting fire to Japanese cities.

Despite the somewhat outlandish proposal, the National Research Defense Committee took the idea seriously. Thousands of Mexican free-tailed bats were captured (they were, for some reason, considered the best option) and tiny napalm incendiary devices were built for them to carry. A complicated release system was developed and tests were carried out. The tests, however, revealed an array of technical problems, especially when some bats escaped prematurely and blew up a hangar and a general’s car.

In December 1943, the Marine Corps took over the project, running 30 demonstrations at a total cost of $2 million. Eventually, however, the program was canceled, probably because the U.S. had shifted its focus onto the development of the atomic bomb.

Gustav rail gun (German) The railway-mounted weapon was the largest gun ever built. Fully assembled, it weighed in at 1,344 tons, and was four stories tall, 20 feet wide, and 140 feet long. It required a 500-man crew to operate it, and had to be moved to be fully disassembled, as the railroad tracks could not bear its weight in transit. It required 54 hours to assemble and prepare for firing.

The bore diameter was just under 3 feet and required 3,000 pounds of smokeless powder charge to fire two different projectiles. The first was a 10,584-pound high explosive shell that could produce a crater 30 feet in diameter. The other was a 16,540-pound concrete-piercing shell, capable of punching through 264 feet of concrete. Both projectiles could be shot, with relatively correct aim, from more than 20 miles away.

The Gustav Gun was used in Sevastopol in the Soviet Union during Operation Barbarossa and destroyed various targets, including a munitions facility in the bay. It was also briefly used during the Warsaw Uprising in Poland. The Gustav Gun was captured by the Allies before the end of World War II and dismantled for scrap. The second massive rail gun, the Dora, was disabled to keep it from falling into Soviet hands near the end of the War.

He said "I know you run the show down here, but give the devil his due…

I’ll bet a toilet of gold against your soul that I can intimidate you"

maybe not the healthiest, but these are some of my favorites https://quex.cc/c/recipes

I don’t blame you re the third party - I wouldn’t either. I generally download a transaction file periodically and import it locally using the app. I think you’re going to find it difficult to find an API that will allow little people access, even though they are obviously happy to offer that to the big companies. Some of the brokerages have checking accounts and it might be possible to pull the transaction data via the brokers API (maybe), but whichever way you look at it, I suspect the most pragmatic solution is probably going to be a download/import of some kind.

what are you looking to do? I don’t know of any consumer bank APIs but most equity and exchange brokerages will let you check account balances and make trades with an API key and credentials. Probably not initiate payments or transfers though. There are too many security risks involved for allowing that via a consumer-level API. There are also tools like Mint that store your credentials and can presumably access your data because they have corporate level agreements with the Financial institutions - I haven’t used that and would not normally recommend a corporate-based solution like that personally, but it might work for your needs.

Interesting - here’s a news story about it (Guardian) ‘It was an accident’: the scientists who have turned humid air into renewable power

Scrolling back through the original news archives is pretty interesting http://info.cern.ch/hypertext/WWW/News/9211.html there’s a link at the bottom of each for “previous edition”.

On the standard Lemmy UI on Android if you click the site logo, top left, you should then see a sidebar button that contains the modlog link.

Maybe they’re just chilling in Mark’s metaverse.

I don’t know if it helps or not for me to point this out (I hope it’s something that gives you some solace), but depending on the circumstances it’s also very difficult to go through an investigation and trial. Maybe things are better now, but 20 or 30 years back it was an ordeal for the victim. The “what were you wearing?” mentality was very prevalent within the male-dominated judiciary and they made it so hard on the victims that they often felt like they were on trial - and in many cases they still didn’t get justice either, despite their personal lives being dissected in front of a room full of strangers, some of whom were intent on falsely portraying them as promiscuous. After seeing this happen to a friend, I lost faith in the system to deliver justice. I don’t have a solution, but an adversarial system just doesn’t seem ideal for this kind of prosecution.

I didn’t notice that you were posting from Mastodon as I’m on Lemmy and your posts appear here just like any other Lemmy user - but the @fuser at the start of your messages is probably the tell, I think Mastodon defaults the username you’re replying to, whereas Lemmy doesn’t. It’s great that we can use different applications without some corporate gatekeeper capturing everybody’s personal info at the integration point to hawk to an advertising company.

Well, thanks again for the info - I’m trying it now and the results seem excellent, it took me to wikiwand, which I’d never used but it’s a front end for wikipedia - it’s quite nice. I’ve learned so much about alternative FOSS and great ad-free content by reading and posting here. I was never a great fan of reddit - liked to scroll but hardly ever posted there - I thought RPAN was the coolest thing they did - but Lemmy is great for conversation, despite the relatively small user base - I’m grateful that reddit’s nonsense drove so many helpful people here.

https://andisearch.com looks like it might be a better option - thank you so much for posting. I’m mostly using duck-duck-go which is tolerable but by this point we should have come up with a more useful way to index relevant information. Google would rather we see ads than any relevant content, which wasn’t the case when they first launched google in the late 1990s. Google was refreshing at the time because of its cleaner interface than yahoo and uncluttered results, amusingly enough - it’s a far cry from what it once was.

Right - that’s a good approach, however if you’re looking for a quick answer to an immediate question by searching using a common search engine, the garbage SEO pages are the most irritating, even with adblocking.