For me it’s the notification light you used to find on older phones, was particularly good to know if your phone was charged without picking it up

  • gedaliyah@lemmy.world
    link
    fedilink
    arrow-up
    84
    arrow-down
    4
    ·
    11 months ago

    Kinda surprised that no one has mentioned the FM tuner. For reasons I never really understood, a lot of companies continued to build the hardware into phones but then wall it off with firmware.

    My first MP3 player had one, my TV had one, there were even watches and lots of other devices that had one. People still listen to radio, so why don’t they give us a tuner?

    • I_Miss_Daniel@lemmy.world
      link
      fedilink
      English
      arrow-up
      44
      ·
      11 months ago

      Mostly because they needed a wired headset to act as the FM antenna since it needs a decent length to capture FM compared to the much higher UHF and GHz frequencies that the mobile network uses.

        • PM_Your_Nudes_Please@lemmy.world
          link
          fedilink
          arrow-up
          9
          arrow-down
          1
          ·
          11 months ago

          Imagine blowing out your phone speakers because you put your phone on the charger while listening to the radio.

          Typically speaking, it’s a bad idea to use power sources as an antenna. Because power pushes a lot more amps than something like a radio signal.

            • PM_Your_Nudes_Please@lemmy.world
              link
              fedilink
              arrow-up
              3
              ·
              11 months ago

              My point is that any sort of radio would be immediately drowned out by the massive amounts of EM interference as soon as you tried to charge.

              In fact, professional audio devices often have to take extra precautions to avoid their power cables from becoming accidental antennas; Anyone who used a cheap set of computer speakers back in the 2000’s and 2010’s will know the distinct buzzing pattern that preceded a text message or phone call. That’s because cheap speakers would use unshielded power sources, and simple circuitry which didn’t bother to isolate the amplifier from the power.

    • I_Miss_Daniel@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      arrow-down
      4
      ·
      11 months ago

      Mostly because they needed a wired headset to act as the FM antenna since it needs a decent length to capture FM compared to the much higher UHF and GHz frequencies that the mobile network uses.

    • CosmicTurtle@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      6
      ·
      11 months ago

      Are you sure the hardware is still there? I only ask because given the number of hackers out there, I’m surprised someone hasn’t come out with a patch or something to make it more ubiquitous.

      • ArbiterXero@lemmy.world
        link
        fedilink
        arrow-up
        10
        ·
        11 months ago

        A lot of it isn’t there anymore….

        But because it was a hardware thing, the patch would involve rooting your phone, something most people won’t do.

      • Aux@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        11 months ago

        It’s not strictly there as a separate feature. Modern radio chips in phones are universal programmable radios, they can catch and process any wavelengths if you install correct code into them and plug a correct antenna. The same radio chip processes your 5G, Bluetooth, WiFi and everything else.

        What phones are missing are FM antennas and radio firmware with FM support. This FM support is a paid feature for phone makers, so they don’t add it.

      • FerbFletcher@reddthat.com
        link
        fedilink
        arrow-up
        1
        ·
        11 months ago

        i think I recall that the Bluetooth hardware is essentially an FM tuner. Just needed a wired headphone to use as an antenna. My Moto Stylus 2022 still has it.